Texas Instruments UCC3839D

Secondary Side Average Current Mode Controller 14-SOIC 0 to 70

DUAL BICMOS GULL WING Surface Mount Secondary-Side Controller 0C~70C 1.3mA 1000kHz 7.5V~15V

0.01 A SWITCHING CONTROLLER 1000 kHz SWITCHING FREQ-MAX PDSO14

PWM Power Supply Controllers Sec Side Avg Current Mode

IC SECONDARY SIDE CTRLR 14SOIC

The UCC3839 provides the control functions for secondary side average current mode control in isolated power supplies. Start up, pulse width modulation and MOSFET drive must be accomplished independently on the primary side. Communication from secondary to primary side is anticipated through an opto-isolator. Accordingly, the UCC3839 contains a fixed gain current sense amplifier, voltage and current error amplifiers, and a Gm type buffer/driver amplifier for the opto-isolator. Additional housekeeping functions include a precision 5V reference and a bias supply regulator. Power for the UCC3839 can be generated by peak rectifying the voltage of the secondary winding of the isolation transformer. From this unregulated voltage, the UCC3839's bias supply regulator will generate its own 7.5V bias supply using an external, N-channel, depletion mode FET. The UCC3839 can be configured for traditional average current mode control where the output of the voltage error amplifier commands the current error amplifier. It can also be configured for output voltage regulation with average current mode short circuit current limiting, employing two parallel control loops regulating the output voltage and output current independently.