onsemi MM74HC74AMX

74HC Series CMOS Dual D-Type Flip-Flop w/ Preset and Clear - SOIC-14

Tape & Reel (TR) 74HC74 e4 74HC flip flop 8.75mm 19ns @ 6V 50pF 94MHz 40ns

Positive edge 4μA 19ns@ 6V,50pF Antiphase，Non-inverting complementary 2 2V 6V 5.2mA Set(Preset) and Reset HC Single ended 5pF 5.2mA 94MHz SOIC-14 SMD mount，glue mount 1.75mm(height)

Connector Housing, Rcpt, 20Pos, 2.54Mm; Product Range:C-Grid Iii 90142 Series; Gender:Receptacle; No. Of Positions:20Positions; Pitch Spacing:2.54Mm; For Use With:Molex

FLIP-FLOP, D-TYPE, 94MHZ, NSOIC-14; Logic Family / Base Number: 74HC74; Flip-Flop Type: D; Propagation Delay: 20ns; Frequency: 94MHz; Output Current: 25mA; Logic Case Style: NSOIC; No. of Pins: 14Pins; Trigger Type: Positive Edg

The MM74HC74A utilizes advanced silicon-gate CMOS technology to achieve operating speeds similar to the equivalent LS-TTL part. It possesses the high noise immu-nity and low power consumption of standard CMOS integrated circuits, along with the ability to drive 10 LS-TTL loads. This flip-flop has independent data, preset, clear, and clock inputs and Q and Q outputs. The logic level present at the data input is transferred to the output during the positive-going transition of the clock pulse. Preset and clear are independent of the clock and accomplished by a low level at the appropriate input. The 74HC logic family is functionally and pin out compatible with the standard 74LS logic family. All inputs are protected from damage due to static discharge by internal diode clamps to V CC and ground.