onsemi MM74HC574MTC

Flip Flop D-Type Bus Interface Pos-Edge 3-ST 1-Element 20-Pin TSSOP Rail

3-STATE Octal D-Type Edge-Triggered Flip-Flop

2V~6V 35MHz 27ns@6V,150pF D-Type 8 1 8uA TSSOP-20 Flip Flops ROHS

Tube 74HC574 e4 74HC flip flop 6.5mm 2V 27ns @ 6V 150pF 35MHz

Flip Flop D-Type Bus I/F Pos-Edge 20SSOP

Bus Driver, HC/UH Series, 1-Func, 8-Bit, True Output, CMOS, PDSO20

IC FLIP FLOP OCT D 3ST 20-TSSOP

Flip Flops 3-ST Oct D Flip-Flop

IC FF D-TYPE SGL 8-BIT 20-TSSOP

IC D-TYPE POS TRG SNGL 20TSSOP

The MM74HC574 high speed octal D-type flip-flops utilize advanced silicon-gate P-well CMOS technology. They possess the high noise immunity and low power consumption of standard CMOS integrated circuits, as well as the ability to drive 15 LS-TTL loads. Due to the large output drive capability and the 3-STATE feature, these devices are ideally suited for interfacing with bus lines in a bus organized system. These devices are positive edge triggered flip-flops. Data at the D inputs, meeting the set-up and hold time requirements, are transferred to the Q outputs on positive going transitions of the CLOCK (CK) input. When a high logic level is applied to the OUTPUT CONTROL (OC) input, all outputs go to a high impedance state, regardless of what signals are present at the other inputs and the state of the storage elements. The 74HC logic family is speed, function, and pinout compatible with the standard 74LS logic family. All inputs are protected from damage due to static discharge by internal diode clamps to VCC and ground.