onsemi MM74HCT541MTC

Buffer/Line Driver 8-CH Non-Inverting 3-ST CMOS 20-Pin TSSOP W Rail

MM74HCT Series 5 V CMOS Inverting/Non Inverting Octal 3-STATE Buffer - TSSOP-20

Fixed Resistor, Thin Film, 0.4W, 249000ohm, 200V, 1% +/-Tol, 50ppm/Cel, Surface Mount, 1406

74HCT541 Tube 2007 WITH DUAL OUTPUT ENABLE logic receiver 7.2mA 7.2mA 38ns 900mum 500mW

Bus Driver, HCT Series, 1-Func, 8-Bit, True Output, CMOS, PDSO20

8μA Non-inverting Tristate 8 8 1 8 4.5V 5.5V 7.2mA Buffer，Non-Inverting 7.2mA TSSOP-20 SMD mount 6.5mm*4.4mm*900μm

IC BUFF NON-INVERT 5.5V 20TSSOP

The MM74HCT540 and MM74HCT541 3-STATE buffers utilize advanced silicon-gate CMOS technology and are general purpose high speed inverting and non-inverting buffers. They possess high drive current outputs which enable high speed operation even when driving large bus capacitances. These circuits achieve speeds comparable to low power Schottky devices, while retaining the low power consumption of CMOS. Both devices are TTL input compatible and have a fanout of 15 LS-TTL equivalent inputs. MM74HCT devices are intended to interface between TTL and NMOS components and standard CMOS devices. These parts are also plug-in replacements for LS-TTL devices and can be used to reduce power consumption in existing designs. The MM74HCT540 is an inverting buffer and the MM74HCT541 is a non-inverting buffer. The 3-STATE control gate operates as a two-input NOR such that if either G1# or G2# are HIGH, all eight outputs are in the high-impedance state. In order to enhance PC board layout, the MM74HCT540 and MM74HCT541 offers a pinout having inputs and outputs on opposite sides of the package. All inputs are protected from damage due to static discharge by diodes to VCC and ground.