onsemi MM74HCT245WM

FAIRCHILD SEMICONDUCTOR MM74HCT245WMBus Transceiver, 8 Gate, 1 Input, 4.5V to 5.5V, SOIC-20

600¦ÌA 1 8 4.5V 5.5V 7.2mA Non-Inverting,Transceiver 7.2mA SOIC-20 13mm*7.6mm*2.35mm

74HCT Series 5 V CMOS Octal 3-STATE Bi-directional Bus Transceiver - SOIC-20

Bus Transceiver Single 8-Channel 3-Straight 20-Pin SOIC

74HCT245 Tube 2005 Tin (Sn) logic buffer 7.2mA 7.2mA 53ns 2.65mm 500mW

Logic IC Operating temperature: -40...+85 °C Function: Octal / 3-State / Bus / Transceiver Manufacturer: Fairchild Package: SO-20 Technology: HCT

74HCT CMOS, SMD, 74HCT245, SOIC20; Logic Case Style:SOIC; No. of Pins:20; Operating Temperature Range:-40°C to +85°C; SVHC:No SVHC (15-Dec-2010); Base Number:74; IC Generic Number:74HCT245; Logic Function Number:245; Logic IC Base Number:74245; Logic IC Family:HCT; Logic IC Function:Octal Bus Transceiver (3-State); No. of Gates:8; No. of Inputs:1; Operating Temperature Max:85°C; Operating Temperature Min:-40°C; Package / Case:SOIC; Supply Voltage:5.5V; Supply Voltage Max:5.5V; Supply Voltage Min:4.5V; Termination Type:SMD

The MM74HCT245 3-STATE bi-directional buffer utilizes advanced silicon-gate CMOS technology and is intended for two-way asynchronous communication between data buses. It has high drive current outputs which enable high speed operation even when driving large bus capacitances. This circuit possesses the low power consumption of CMOS circuitry, yet has speeds comparable to low power Schottky TTL circuits. This device is TTL input compatible and can drive up to 15 LS-TTL loads, and all inputs are protected from damage due to static discharge by diodes to VCC and ground. The MM74HCT245 has one active low enable input (G#), and a direction control (DIR). When the DIR input is HIGH, data flows from the A inputs to the B outputs. When DIR is LOW, data flows from B to A. MM74HCT devices are intended to interface between TTL and NMOS components and standard CMOS devices. These parts are also plug-in replacements for LS-TTL devices and can be used to reduce power consumption in existing designs.