onsemi MM74HC175MTCX

Flip Flop D-Type Bus Interface Pos-Edge 1-Element 16-Pin TSSOP W T/R

2V~6V 70MHz 26ns@6V,50pF D-Type 4 1 8uA TSSOP-16 Flip Flops ROHS

Quad D-Type Flip-Flop with Clear

D Flip-Flop, HC/UH Series, 1-Func, Positive Edge Triggered, 4-Bit, Complementary Output, CMOS, PDSO16

D FLIP-FLOP, HC/UH SERIES, 1-FUN

IC FF D-TYPE SNGL 4BIT 16TSSOP

Positive Edge, 8μA, 26ns@6V,50pF, Inverting/Non-Inverting, Complementary, 1-Ch, 2V, 6V, 5.2mA, Master Reset, HC, Single-Ended, 5pF, 5.2mA, 70MHz, TSSOP-16, SMD, Adhesive Mount, 5mm × 4.4mm × 900μm

The MM74HC175 high speed D-type flip-flop with complementary outputs utilizes advanced silicon-gate CMOS technology to achieve the high noise immunity and low power consumption of standard CMOS integrated circuits, along with the ability to drive 10 LS-TTL loads. Information at the D inputs of the MM74HC175 is transferred to the Q and Q# outputs on the positive going edge of the clock pulse. Both true and complement outputs from each flip flop are externally available. All four flip-flops are controlled by a common clock and a common CLEAR. Clearing is accomplished by a negative pulse at the CLEAR input. All four Q outputs are cleared to a logical "0" and all four Q# outputs to a logical "1." The 74HC logic family is functionally as well as pin-out compatible with the standard 74LS logic family. All inputs are protected from damage due to static discharge by internal diode clamps to VCC and ground.