onsemi FAN7930CMX-G

FAN7930C Series 20 V 3 mA 350 kHz Surface Mount Power Factor Controller - SOP-8

Power Factor Correction and PWM Controller 0.12mA 350kHz 8-Pin SOIC N T/R

Critical Conduction Mode (CrM) Power Factor Controller, PFC-Ready Signal

250kHz~350kHz 13V~20V SOP-8 AC-DC Controllers & Regulators ROHS

Power Factor Correction CONTRLR 0.19mA 350KHz 8-Pin SOP T/R

IC PFC CTLR CRITICAL CONF 8-SOIC

AC-DC Controller And Voltage Regulator

Tape & Reel (TR) FAN7930 ACTIVE (Last Updated: 1day ago) e4 power factor correction device 13V~20V 250kHz~350kHz 120muA 1.27mm

CAP FILM 0.22UF 20% 275VAC RAD

The FAN7930C is an active power factor correction (PFC) controller for boost PFC applications that operate in critical conduction mode (CRM). It uses a voltage-mode PWM that compares an internal ramp signal with the error amplifier output to generate a MOSFET turn-off signal. Because the voltage-mode CRM PFC controller does not need rectified AC line voltage information, it saves the power loss of an input voltage sensing network necessary for a current-mode CRM PFC controller. FAN7930C provides over-voltage protection (OVP), open-feedback protection, over-current protection (OCP), input-voltage-absent detection, and under-voltage lockout protection (UVLO). The PFC-ready pin can be used to trigger other power stages when PFC output voltage reaches the proper level with hysteresis. The FAN7930C can be disabled if the INV pin voltage is lower than 0.45V and the operating current decreases to a very low level. Using a new variable on-time control method, THD is lower than the conventional CRM boost PFC ICs.