onsemi FAN53202UC23X

FAN53202 5 A, 2.4 MHz, Digitally Programmable TinyBuck® Regulator

Conv DC-DC 2.5V to 5.5V Step Down Single-Out 0.6V to 1.3875V 5A 20-Pin WLCSP T/R

IC REG BUCK PROG 5A SYNC 20WLCSP

BIPOLAR JUNCTION TRANSISTOR ARRAYS - BJT;

Tape & Reel (TR) Tin/Silver/Copper (Sn/Ag/Cu) LAST SHIPMENTS (Last Updated: 5days ago) Obsolete DC to DC switching regulator 3.6V 0.625mm 5A 2.4MHz

The FAN53202 is a step-down switching voltage regulator that delivers a digitally programmable output from an input voltage supply of 2.5 V to 5.5 V. The output voltage is programmed through an I2C interface capable of operating up to 3.4 MHz.Using a proprietary architecture with synchronous rectification, the FAN53202 is capable of delivering 5 A continuous at over 80% efficiency, while maintaining over 80% efficiency at load currents as low as 10 mA. The device can also support a 7 A 500 ms pulse. The regulator operates at a nominal fixed frequency of 2.4 MHz, which reduces the value of the external components to 330 nH for the inductor and as low as 22 µF for the output capacitor. Additional output capacitance can be added to improve regulation during load transients without affecting stability. Inductance up to 1.2 µH may be used with additional output capacitance.At moderate and light loads, Pulse Frequency Modulation (PFM) is used to operate in Power-Save Mode with a typical quiescent current of 60 µA. Even with such a low quiescent current, the part exhibits excellent transient response during large load swings. At higher loads, the system automatically switches to fixed-frequency control, operating at 2.4 MHz. In Shutdown Mode, the supply current drops below 1 µA, reducing power consumption. PFM Mode can be disabled if constant frequency is desired. The FAN53202 is available in a 20-bump, 1.6 x 2 mm, WLCSP.