Infineon TLE5012BE1000XUMA1

Coreless magnetic current sensor for AC and DC measurements , PG-DSO-8, RoHS

Rotary Position Sensor 5.5V Digital Output Automotive 8-Pin DSO T/R

Board Mount Hall Effect / Magnetic Sensors GMR Based Angle Sensor 6.5V

RotaryPosition Sensor 5.5V Automotive 8-Pin DSO Tape and Reel

Angle Sensor, 3 V to 5.5 V supply, SOIC-8

Position Sensors; TLE5012B E1000; INFINEON TECHNOLOGIES

ANGLE SENSOR, AEC-Q100, 5.5V, SOIC-8

Magnetoresistive Sensor 8-Pin DSO T/R

0掳~360掳 SO-8 Position Sensors ROHS

SENSOR POSITION ANGLE GMR 8DSO

Infineon TLE5012BE1000XUMA1 傾斜計

The TLE5012B is a 360° angle sensor that detects the orientation of a magnetic field. This is achieved by measuring sine and cosine angle components with monolithic integrated Giant Magneto Resistance (iGMR) elements. These raw signals (sine and cosine) are digitally processed internally to calculate the angle orientation of the magnetic field (magnet). The TLE5012B is a pre-calibrated sensor. The calibration parameters are stored in laser fuses. At start-up the values of the fuses are written into flip-flops, where these values can be changed by the application-specific parameters. Further precision of the angle measurement over a wide temperature range and a long lifetime can be improved by enabling an optional internal autocalibration algorithm. Data communications are accomplished with a bi-directional Synchronous Serial Communication (SSC) that is SPI-compatible. The sensor configuration is stored in registers, which are accessible by the SSC interface. Additionally four other interfaces are available with the TLE5012B: Pulse-Width-Modulation (PWM) Protocol, Short-PWM-Code (SPC) Protocol, Hall Switch Mode (HSM) and Incremental Interface (IIF). These interfaces can be used in parallel with SSC or alone. Pre-configured sensor derivates with different interface settings are available.Online diagnostic functions are provided to ensure reliable operation.