Honeywell SS495A

Sensor; Sink; 4.5 to 10.5 VDC; 8.7 mA @ 5 VDC; 0.2 VDC (Typ.)/0.4 VDC (Min.)

Honeywell Hall effect sensor, Proportional output, Through hole mounting, 4.5 → 10.5 V DC power supply, Maximum operating temperature+150°C

HALL EFFECT SENSOR, LINEAR, TO-92-3; Sensor Case / Package: TO-92; No. of Pins: 3Pins; Supply Voltage Min: 4.5V; Supply Voltage Max: 10.5V; Operating Temperature Min: -40°C; Operating Temperature Max: 150°C; Product Range: SS49

Hall Effect Sensor; Operate Point Max:670G; Operate Point Min:-670G; Package/Case:TO-92; Supply Voltage Max:10.5VDC; Supply Voltage Min:4.5VDC; Mounting Type:Through Hole; No. of Contacts:3; Operational Type:Sink/Source ;RoHS Compliant: Yes

SS490 Series MRL (Miniature Ratiometric Linear) sensors have a ratiometric output voltage, set by the supply voltage. It varies in proportion to the strength of the magnetic field.A new Hall effect integrated circuit chip provides increased temperat

The SS490 Series MRL (Miniature Ratiometric Linear) sensors are versatile linear Hall effect devices operated by the magnetic field from a permanent magnet or an electromagnet. The ratiometric output voltage is set by the supply voltage. It varies in proportion to the strength of the magnetic field. The integrated circuitry provides increased temperature stability and sensitivity. Laser trimmed thin film resistors on the chip provide high accuracy (null to ± 3%, sensitivity up to ±3%) and temperature compensation. The positive temperature coefficient of the sensitivity (+0.02 %/°C typical) compensates for the negative temperature coefficients of low-cost magnets. The SS490B Series sensors offer cost-effective MRL sensing with slightly wider specifications than the SS490 products. The SS490B has a typical sinking or sourcing output of 1.5 mA continuous, uses 7 mA of supply current at 5.0 volts at 25°C, for predictable performance over the full temperature range. SS490B Series sensors have wider null and sensitivity tolerances and a wider drift over temperature. NOTE: Products ordered in bulk packaging (plastic bags) may not have perfectly straight leads as a result of normal handling and shipping operations. Please order tape packaging option for applications with critical lead straightness requirements.