Honeywell RTY090LVNAX

Hall Effect Sensor, 1%, 5V, Ratiometric Rohs Compliant: Yes |Honeywell RTY090LVNAX

Industrial Motion & Position Sensors 90 deg (+/- 45 deg) 5V NA Pinout

Hall Effect 90¡ã(¡À45) Increase Clockwise 5.5V ¡À1% Flatted Shaft 55mm*40.6mm

HONEYWELL RTY090LVNAX SENSOR, ROTARY, HALL EFFECT, 90DEG

Hall-Effect Sensor Rotary Position Sensing 200 MHz

Rotary Position Sensor 5.5V 35MCycles 3-Pin

Hall Effect Sensor 45Deg Min 135Deg Max

ROTARY SENSOR, 90 DEG, LOW VOLTAGE, N P

RTY Series with integral actuator, 90° (±45°) operating range, 5 Vdc supply voltage, North American pinout style; standard: 0.5 Vdc (left), 4.5 Vdc (right) ratiometric output, shaft without lever The RTY Series Hall-effect Rotary Position Sensors provide non-contact sensing in harsh transportation and industrial applications at a competitive cost. These shaft activated products are available in two versions: an integral shaft with or without a lever. The lever may allow customers to reduce the number of mechanical linkages required for their applications, which may reduce the cost of the overall customer solution. These products use a magnetically biased, Hall-effect integrated circuit (IC) to sense rotary movement of the actuator over a set operating range. Rotation of the actuator changes the magnet’s position relative to the IC. The resulting flux density change is converted to a linear output. The IC, together with conditioning and protection circuitry, is sealed in an IP69K-qualified rugged package for durability in most harsh environments. Eight operating ranges from 50° to 360° are tolerant to over-travel and allow use in most common applications. Low voltage and high voltage versions cover an input voltage range of 4.5 Vdc to 30 Vdc. Honeywell’s industry-leading capabilities in research and development provide the customer with known quality and support.