Analog Devices ADG451BNZ

ANALOGUE SW, 4CH, SPST-NO, DIP-16; Available until stocks are exhausted Alternative available

IC SWITCH SPST-NC X 4 5OHM 16DIP 4 Circuit IC Switch 1:1 5Ohm 16-PDIP

ANALOG DEVICES ADG451BNZAnalogue Switch, Quad Channel, SPST, 4 Channels, 5 ohm,4.5V to20V, DIP, 16 Pins

Analogue Sw, 4Ch, Spst-No, Dip-16; |Analog Devices, Inc. ADG451BNZ

Analog Switch Quad SPST 16-Pin PDIP N Tube

SPST, 4 Func, 1 Channel, CMOS, PDIP16

IC REG LINEAR 3.3V 1.5A SOT223

The ADG451/ADG452/ADG453 are monolithic CMOS devices comprising four independently selectable switches. They are designed on an enhanced LC2MOS process that provides low power dissipation yet gives high switching speed and low on resistance. The on resistance profile is very flat over the full analog input range, ensuring excellent linearity and low distortion when switching audio signals. Fast switching speed, coupled with high signal bandwidth, makes the parts suitable for video signal switching. CMOS construction ensures ultra low power dissipation, making the parts ideally suited for portable and battery-powered instruments. The ADG451/ADG452/ADG453 contain four independent single-pole/single-throw (SPST) switches. The ADG451 and ADG452 differ only in that the digital control logic is inverted. The ADG451 switches are turned on with a logic low on the appropriate control input, while a logic high is required for the ADG452. The ADG453 has two switches with digital control logic similar to that of the ADG451, while the logic is inverted on the other two switches. Each switch conducts equally well in both directions when on, and has an input signal range that extends to the supplies. In the off condition, signal levels up to the supplies are blocked. The ADG453 exhibits break-before-make switching action for use in multiplexer applications. Inherent in the design is low charge injection for minimum transients when switching the digital inputs.