TE Connectivity 828904-1

Connector Cable Seal, 2.1 mm, AMP JPT Series Connectors, AMP JPT Series, Silicone

WIRE SEAL, SINGLE, FOR J.P.T.CONN; Cable Diameter Max: 2.1mm; For Use With: AMP MCP 2.8 Contact Systems; Product Range: JPT Series; Seal Material: Silicone; SVHC: No SVHC (15-Jan-2019); Accessory Type: Seal

Sealing; Rango De Producto:Serie Jpt; Para Usar Con:Jpt Series Connectors; Sellado, Material:-; Diámetro De Cable Max:2.1Mm; Tipo De Accesorio:Wire Seal |Amp Te Connectivity 828904-1

SINGLE WIRE SEAL FOR J.P.T.CON Connector Seal & Plug Type: Single Wire Seal (SWS) Cavity Diameter: 5.2 mm Cavity Diameter: .205 in Operating Temperature Range: -40 – 130 °C Operating Temperature Range: -40 – 266 °F Single Wire Seal (SWS) 5.2 mm | Connector Seal & Cavity Plug | Part Number: 828904-1 | Internal Number: 828904-1 | Alias Number: CF0547-000 | TE Connectivity | AMP

The VHC132 is an advanced high speed CMOS 2-inputNAND Schmitt Trigger Gate fabricated with silicon gate CMOS technology. It achieves the high-speed operation similar to Bipolar Schottky TTL while maintaining the CMOS low power dissipation. Pin configuration and func-tion are the same as the VHC00 but the inputs have hysteresis between the positive-going and negative-going input thresholds, which are capable of transforming slowly changing input signals into sharply defined, jitter-free out-put signals. Thus greater noise margin then conventional gates is provided. An input protection circuit ensures that0V to 7V can be applied to the input pins without regard to the supply voltage. This device can be used to interface 5Vto 3V systems and two supply systems such as battery backup. This circuit prevents device destruction due to mis-matched supply and input voltages.