Renesas HA9P5320-5ZX96

Pb-Free w/Anneal SMP&HLD 2MHZ 1US INTCAP 16WSOIC COM, T&R, TAPE AND REEL PACKING

1 Microsecond Precision Sample and Hold Amplifier

IC OPAMP SAMPLE&HOLD 2MHZ 16SOIC

Sample and Hold Circuit, 1 Func, Sample, 1us Acquisition Time, PDSO16

SOIC-16 Pre-ordered Chips ROHS

1999 SAMPLE AND HOLD CIRCUIT Tape & Reel (TR) RoHS Compliant SAMPLE AND HOLD CIRCUIT Amplifier 45V/mus 75C 600kHz 500muV

MICROCIRCUIT SAMPLE & HOLD AMPL HA9P5320

The HA-5320 was designed for use in precision, High-Speed data acquisition systems. The circuit consists of an input transconductance amplifier capable of providing large amounts of charging current, a low leakage analog switch, and an output integrating amplifier. The analog switch sees virtual ground as its load; therefore, charge injection on the hold capacitor is constant over the entire input/output voltage range. The pedestal voltage resulting from this charge injection can be adjusted to zero by use of the offset adjust inputs. The device includes a hold capacitor. However, if improved droop rate is required at the expense of acquisition time, additional hold capacitance may be added externally. This monolithic device is manufactured using the Intersil Dielectric Isolation Process, minimizing stray capacitance and eliminating SCRs. This allows higher speed and latchfree operation. For further information, please see Application Note AN538.