onsemi MM74HC373MTC

8¦ÌA 19ns 1 2V 6V 7.8mA D-Type Transparent Latch HC 1 7.8mA TSSOP-20 6.5mm*4.4mm*900¦Ìm

Latch Transparent 3-ST 8 Channel D-Type 20-Pin TSSOP Rail

74HC373 Tube HC/UH 74HC latch circuit 7.8mA 7.8mA 280ns 191mg -40C~85C

Flip Flop Logic IC; Logic Type:Latch; Logic Family:HC; Supply Voltage Min:2V; Supply Voltage Max:6V; Termination Type:SMD; Package/Case:20-TSSOP; No. of Pins:20; Operating Temperature Range:-40°C to +85°C ;RoHS Compliant: Yes

The MM74HC373 high speed octal D-type latches utilize advanced silicon-gate CMOS technology. They possess the high noise immunity and low power consumption of standard CMOS integrated circuits, as well as the ability to drive 15 LS-TTL loads. Due to the large output drive capability and the 3-STATE feature, these devices are ideally suited for interfacing with bus lines in a bus organized system. When the LATCH ENABLE input is HIGH, the Q outputs will follow the D inputs. When the LATCH ENABLE goes LOW, data at the D inputs will be retained at the outputs until LATCH ENABLE returns HIGH again. When a high logic level is applied to the OUTPUT CONTROL input, all outputs go to a high impedance state, regardless of what signals are present at the other inputs and the state of the storage elements. The 74HC logic family is speed, function, and pin-out compatible with the standard 74LS logic family. All inputs are protected from damage due to static discharge by internal diode clamps to VCC and ground.