The H11LXM series has a high speed integrated circuitdetector optically coupled to a gallium-arsenide infraredemitting diode. The output incorporates a Schmitttrigger, which provides hysteresis for noise immunity andpulse shaping. The detector circuit is optimized forsimplicity of operation and utilizes an open collectoroutput for maximum application flexibility.
Propagation Delay Time Max. us = 4 / Supply Voltage Min. V = 3 / Supply Voltage Max. V = 15 / Power Dissipation (Pd) mW = 250 / Continuous Output Current Max. mA = 50 / Reverse Voltage (Vr) V = 6 / Package Type = PDIP / Forward Voltage (Vf) Max. V = 1.5 / Output Type = Open Collector / Isolation Voltage kV = 4.2 / Forward Current (If) Max. mA = 30 / Output Fall Time ns = 100 / Output Rise Time ns = 100 / Operating Temperature Max. °C = 85 / Operating Temperature Min. °C = -40 / Signal Rate kBd = 976 / Channels = 1
OPTOCOUPLER, SCHIMITT TRIGGER O/P; No. of Channels:1; Isolation Voltage:7.5kV; Optocoupler Output Type:Schmitt Trigger; Input Current:10mA; Output Voltage:16V; Opto Case Style:SMD; No. of Pins:6; SVHC:No SVHC (20-Jun-2011); Approval Category:UL Recognised; Baud Rate Bits per Second:1Mbps; Continuous Collector Current Ic Max:5mA; Current Ic Continuous a Max:1.6mA; External Depth:6.35mm; External Length / Height:4.0mm; External Width:8.51mm; Fall Time tf:0.1µs; Forward Voltage VF Max:1.5V; Frequency Max:1MHz; On Current Ic:10mA; Operating Temperature Range:-40°C to +85°C; Output Current:50mA; Output Type:Schmitt Trigger; Peak Forward Current:60mA; Peak Output Current:3A; Power Dissipation Pd:250mW; Power Dissipation Pd:250mW; Propagation Time H-L:2.0µs; Propagation Time L-H:1.0µs; Rise Time:0.1µs; Voltage Vcc Max:16V; Voltage Vf Typ:1.2V