onsemi FXMA2102L8X

Dual Supply 2-Bit Voltage Translator/Buffer/Repeater Isolator for I2C Applications

FXMA2102 Series 5.5 V Configurable Dual-Voltage-Supply Translator - MICROPAK-8

Buffer/Isolator/Repeater/Translator, 1.65V to 5.5V Supply, MicroPak-8

1.65V~5.5V 1 2 1.65V~5.5V SMD Translators / Level Shifters ROHS

Voltage Level Translator 2-CH Bidirectional 8-Pin MicroPak T/R

e4 ACTIVE (Last Updated: 1week ago) FXMA2102 Nickel/Palladium/Gold (Ni/Pd/Au) level shifter translator 4ns 5V 25mg 6mA

IC V_XLTR DL BUF 1.6/5.5V MPK8

Logic Function = Voltage Translator / Channels = 2 / Output Type = Open Drain / Propagation Delay Time ns = 3 / Supply Voltage Min. V = 1.65 / Supply Voltage Max. V = 5.5 / Operating Temperature Min. °C = -40 / Operating Temperature Max. °C = 85 / Package Type = UQFN / Pins = 8 / Mounting Type = SMD / MSL = Level-1 / Packaging = Tape & Reel / Reflow Temperature Max. °C = 260 / Power Dissipation (Pd) mW = 0.129

The FXMA2102 is a high-performance configurable dual-voltage-supply translator for bi-directional voltage translation over a wide range of input and output voltages levels.Intended for use as a voltage translator in applications using the I2C bus interface, the input and output voltage levels are compatible with I2C device specification voltage levels. External pull-up resistors are required.The device is designed so that the A port tracks the VCCA level and the B port tracks the VCCB level. This allows for bi-directional A/B port voltage translation between any two levels from 1.65V to 5.5V. VCCA can equal VCCB from 1.65V to 5.5V. The OE pin is referenced to VCCA.Either VCC can be powered-up first. Internal power-down control circuits place the device in 3-state if either VCC is removed.The two ports of the device have automatic direction sense capability. Either port may sense an input signal and transfer it as an output signal to the other port.