onsemi FXLA104UM12X

1.1V~3.6V 1 4 1.1V~3.6V 140Mbps UMLP-12(1.8x1.8) Translators / Level Shifters ROHS

Voltage Level Translator 4-CH Bidirectional 12-Pin UQFN T/R

FXLA104 Series 1.1 V to 3.6 V SMT Dual-Supply Voltage Translator - UMLP-12

Low-Voltage Dual Supply 4-Bit Voltage Translator

Voltage Level 8.5ns@ 1.4Vto1.6V , 1 4 1.1V 3.6V 140Mbps 1.1V~3.6V 1.1V~3.6V UMLP-12 , 1.8mm*1.8mm*500¦Ìm

e4 ACTIVE (Last Updated: 6days ago) FXLA104 Nickel/Palladium/Gold (Ni/Pd/Au) level shifter translator 4ns 3.6V 13.155386mg -4muA

IC TRNSLTR BIDIRECTIONAL 12MLP / Voltage Level Translator Bidirectional 1 Circuit 4 Channel 140Mbps 12-UMLP (1.8x1.8)

TTL/CMOS to CMOS Translator, PQCC12

IC TRANSLTR BIDIRECTIONAL 12UMLP

IC TRNSLTR BIDIRECTIONAL 12MLP

The FXLA104 is a configurable dual-voltage supply translator for both uni-directional and bi-directional voltage translation between two logic levels. The device allows translation between voltages as high as 3.6V to as low as 1.1V. The A port tracks the VCCA level and the B port tracks the VCCB level. This allows for bi-directional voltage translation over a variety of voltage levels: 1.2V, 1.5V, 1.8V, 2.5V, and 3.3V The device remains in three-state as long as either VCC=0V, allowing either VCC to be powered up first. Internal power-down control circuits place the device in 3-state if either VCC is removed. The /OE input, when HIGH, disables both the A and B ports by placing them in a 3-state condition. The /OE input is supplied by VCCA. The FXLA104 supports bi-directional translation without the need for a direction control pin. The two ports of the device have auto-direction sense capability. Either port may sense an input signal and transfer it as an output signal to the other port.