onsemi FSFA2100

Integrated Power Switch (FPS™) for 450W Half-bridge Asymmetric Converter

FSFA2100 ACTIVE (Last Updated: 1week ago) Current Limiting Over Load Over Temperature Over Voltage Tube dc ac converter 17V 26.2mm 12W 100kHz

SWITCH, PWM, FET, 450W, ZVS, 9SIP; Input Voltage:25V; On State Resistance:0.32ohm; Distribution Switch Case Style:SIP; No. of Pins:9; Thermal Protection:Yes; Power Dissipation Pd:12W; No. of Outputs:1; Operating Temperature Range:-40°C to +130°C; MSL:MSL 1 - Unlimited; Internal Switch:Yes

The growing demand for higher power density and low profile in power converter designs has forced designers to increase switching frequencies. Operation at higher frequencies considerably reduces the size of passive components, such as transformers and filters. However, switching losses have been an obstacle to high-frequency operation. To reduce switching losses and allow high-frequency operation, Pulse Width Modulation (PWM) with soft-switching techniques have been developed. These techniques allow switching devices to be softly commutated, which dramatically reduces the switching losses and noise. FSFA2100 is an integrated PWM controller and SuperFET® specifically designed for Zero-Voltage-Switching (ZVS) half-bridge converters with minimal external components. The internal controller includes an oscillator, under-voltage-lockout, leading-edge blanking (LEB), optimized high-side and low-side gate driver, internal soft-start, temperature-compensated precise current sources for loop compensation and self-protection circuitry. Compared with discrete MOSFET and PWM controller solution, FSFA2100 can reduce total cost; component count, size, and weight; while simultaneously increasing efficiency, productivity, and system reliability.