onsemi FAN48632UC35X

2.5 MHz, 2.0 A Pulsed-Load Synchronous TinyBoost™ Regulator with Bypass Mode for GSM PA Supply

Voltage Regulators - Switching Regulators 3MHz, 1500mA, Synchronous TinyBoost TM Regulator with Bypass

Conv DC-DC 2.35V to 5.5V Step Up Dual-Out 3.5V/3.7V 1.5A 16-Pin WLCSP T/R

Switching Voltage Regulators 3MHZ DC/DC BOOST 1.5A

3.5V,3.7V ,GSM PA BGA , 1.78mm*1.78mm*380¦Ìm

DC / DC SWITCHING REGULATORS - FIXED;

IC REG CONV GSM PA 1OUT 16WLCSP

Professional Power Management (PMIC)

The FAN48632 allows systems to take advantage of new battery chemistries that can supply significant energy when the battery voltage is lower than the required voltage for system power ICs. By combining built-in power transistors, synchronous rectification, and low supply current; this IC provides a compact solution for systems using advanced Li-Ion battery chemistries.The FAN48632 is a boost regulator designed to provide a minimum output voltage (VOUT(MIN)) from a single-cell Li-Ion battery, even when the battery voltage is below system minimum. In boost mode, output voltage regulation is guaranteed to a maximum load current of 1.5 A continuous and 2.0 A pulsed. Quiescent current in Shutdown Mode is less than 3 µA, which maximizes battery life. The regulator transitions smoothly between Bypass and normal Boost Mode. The device can be forced into Bypass Mode to reduce quiescent current.The FAN48632 is available in a 16-bump, 0.4 mm pitch, Wafer-Level Chip-Scale Package (WLCSP).