onsemi FAN23SV06MPX

BUCK, SYNCH, ADJ, 6A, 1.5MHZ, 34PQFN; Primary Input Voltage:15V; No. of Outputs:

Switching Regulator, Voltage-Mode, 6A, 1500kHz Switching Freq-Max

Conv DC-DC 7V to 15V Synchronous Step Down Single-Out 0.6V to 5.5V 9A 34-Pin PQFN EP T/R

FAN23SV06 Tape & Reel (TR) Tin (Sn) ACTIVE NOT REC (Last Updated: 1week ago) DC to DC switching regulator 5.5V 5mm 6A 200kHz~1.5MHz

BUCK, SYNCH, ADJ, 6A, 1.5MHZ, 34PQFN; Topology: Synchronous Buck (Step Down); Input Voltage Min: 7V; Input Voltage Max: 15V; No. of Outputs: 1Outputs; DC / DC Converter IC Case: QFN; No. of Pins: 34Pins; Output Current: 6A; Out

The FAN23SV06/FAN23SV06P is a highly efficient integrated synchronous buck regulator. The regulator is capable of operating with an input range from 7 V to 18 V and supporting 6 A continuous load currents. The device can operate from a 5 V rail (±10%) if VIN, PVIN, and PVCC are connected together to bypass the internal linear regulator.These devices utilize Fairchild’s constant on-time control architecture to provide excellent transient response and to maintain a relatively constant switching frequency. The FAN23SV06 utilizes Pulse Frequency Modulation (PFM) mode to maximize light-load efficiency by reducing switching frequency when the inductor is operating in discontinuous conduction mode at light loads. The FAN23SV06P with forced Pulse Width Modulation (PWM) mode is available for applications that require a relatively constant switching frequency across the full load range. Switching frequency and over-current protection can be programmed to provide a flexible solution for various applications. Output over-voltage, under-voltage, over-current, and thermal shutdown protections help prevent damage to the device during fault conditions. After thermal shutdown is activated, a hysteresis feature restarts the device when normal operating temperature is reached.