Infineon PVA3324NPBF

SSR RELAY SPST-NO 150MA 0-300V / Solid State SPST-NO (1 Form A) 8-DIP (0.300", 7.62mm), 4 Leads

PVA Photovoltaic 0.15 A SPST (1 Form A) 300 V 24 Ohm Solid State Relay - MDIP-8

Relay SSR 25mA DC-IN 0.15A 300V AC/DC-OUT 4-Pin PDIP Tube

Relay;Solid State;SPST-NO;Ctrl-V 1.25DC;0.15A;300VDC;PCB Mnt;Thru Hole;4Pin

1 Form A Photovoltaic Relay in a mod. 8-pin DIP Package, DIP8, RoHS

Contact Configuration = 1NO / Termination Type = Pins / Mounting Type = Through Hole / Width mm = 6.5 / Length mm = 9.4 / Load Voltage Max. V = 300 / Load Current Max. mA = 150 / Load Voltage Min. V = 0 / Height mm = 4.6 / Package Type = DIP-8

Contact Form:spst-No (1 Form A); Load Type:ac / Dc; Load Voltage Max:300V; Load Current:150Ma; Mosfet Relay Package Style:dip-8 (4-Pin Used); Relay Mounting:through Hole; Relay Terminals:pc Pin; On State Resistance Max:24Ohm Rohs Compliant: Yes

300 V, 150 mA single pole Photovoltaic Relay in a mod. 8-pin DIP. This normally open solid-state relay can replace electromechanical relays used for general purpose switching of analog signals. The PVA33 Series overcomes the limitations of both conventional electromechanical and reed relays by offering the solid state advantages of long life, fast operating speed, low pick up power, bounce-free operation, low thermal offset voltages and miniature package. These advantages allow product improvement and design innovations in many applications such as process control, multiplexing, automatic test equipment and data acquisition. The PVA33 can switch analog signals from thermocouple level to 300 Volts peak AC or DC polarity. Signal frequencies into the RF range are easily controlled and switching rates up to 500Hz are achievable. The extremely small thermally generated offset voltages allow increased measurement accuracies.