Honeywell CSNA111

Closed Loop Current Sensor Sensor/Transducer, Single-ended, 3 Pin, Plastic/epoxy

Closed Loop Current Sensor AC/DC Current ±15V Automotive 3-Pin

Current Sensor; Accuracy:0.5%; Current Range AC:± 70A; Current Range DC:± 70A; Current Rating:10mA; External Depth:19mm; Length:40.5mm; Operational Type:Current; Output Type:Sink; Package/Case:PCB-Through Hole; Series:CSN ;RoHS Compliant: Yes

SENSOR, CURRENT, 15A; Operating Frequency Range:DC to 150kHz; Supply Voltage Range DC:15V; Sensor Output1:Closed Loop; Accuracy:0.5%; Response Time:1µs; SVHC:No SVHC (20-Jun-2011); Accuracy %:0.5%; Current Consumption:10mA; Current Range AC:± 70A; Current Range DC:± 70A; External Depth:19mm; External Length / Height:25.7mm; Output Type:Closed Loop; Series:CSNA111; Transducer Function:Closed Loop Current

CSN Series closed loop linear current sensor, measures ac, dc or impulse current, 50 A nominal, ±70 A range, 1000 turns CSN Series closed loop linear current sensors are based on magnetoresistive or Hall-effect technology and the null balance or zero magnetic flux method (feedback system). The magnetic flux in the sensor core is constantly controlled at zero. The amount of current required to balance zero flux is the measure of the primary current flowing through the conductor, multiplied by the ratio of the primary to secondary windings. This closed loop current is the output from the device and presents an image of the primary current reduced by the number of secondary turns at any time. This current can be expressed as a voltage by passing it through a resistor.