NXP Semiconductors 74HC4052D-T

Differential Multiplexer, 1 Func, 4 Channel, CMOS, PDSO16

DUAL 4-CHANNEL ANALOG MUX/DMUX <AZ

Logic IC; Logic Type:Multiplexer/Demultiplexer; Logic Family:HC; Logic Base Number:744052; On Resistance, Rds(on):90ohm; No. of Outputs:8; Supply Voltage Min:2V; Supply Voltage Max:10V; Termination Type:SMD; Package/Case:16-SOIC ;RoHS Compliant: Yes

The 74HC4052 and 74HCT4052 are high-speed Si-gate CMOS devices and are pin compatible with the HEF4052B. They are specified in compliance with JEDEC standard no. 7A. The 74HC4052 and 74HCT4052 are dual 4-channel analog multiplexers or demultiplexers with common select logic. Each multiplexer has four independent inputs/outputs (pins nY0 to nY3) and a common input/output (pin nZ). The common channel select logics include two digital select inputs (pins S0 and S1) and an active LOW enable input (pin E). When pin E = LOW, one of the four switches is selected (low-impedance ON-state) with pins S0 and S1. When pin E = HIGH, all switches are in the high-impedance OFF-state, independent of pins S0 and S1. VCC and GND are the supply voltage pins for the digital control inputs (pins S0, S1, and E). The VCC to GND ranges are 2.0 V to 10.0 V for 74HC4052 and 4.5 V to 5.5 V for 74HCT4052. The analog inputs/outputs (pins nY0 to nY3 and nZ) can swing between VCC as a positive limit and VEE as a negative limit. VCC - VEE may not exceed 10.0 V. For operation as a digital multiplexer/demultiplexer, VEE is connected to GND (typically ground).