Texas Instruments SN74LS628

these voltage-controlled oscillators (vcos) are improved versions of the original vco family: sn54ls124 sn54ls324...
Ficha de dados

Preço e estoque

Distribuidor
SKU
Mín.
Embalagem
Preço em massa

Fichas técnicas e documentos

Baixe as fichas de dados e a documentação do fabricante para Texas Instruments SN74LS628.

Texas Instruments

Datasheet12 páginas18 anos atrás

Modelos CAD

Baixe o símbolo, a pegada e os modelos 3D STEP de Texas Instruments SN74LS628 direto dos nossos confiáveis parceiros.

FONTEeCADmCADARQUIVOS
EE Concierge
SímboloPegada
Ultra Librarian
SímboloPegada
Baixar
O site do parceiro será aberto em uma nova aba ao baixar os seus modelos CAD
Ao baixar os modelos CAD do Octopart, você concorda com nossos Termos e Condições e Política de Privacidade.

Descrições

Descrições de Texas Instruments SN74LS628 fornecidas pelos seus distribuidores.

these voltage-controlled oscillators (vcos) are improved versions of the original vco family: sn54ls124 sn54ls324 thru sn54ls327 sn74ls124 and sn74ls324 thru sn74ls327. these new devices feature improved voltage-to-frequency linearity range and compensation. with the exception of the ls624 and ls628 all of these devices feature two independent vcos in a single monolithic chip. the ls624 ls625 ls626 and ls628 have complementary z outputs. the output frequency for each vco is established by a single external component (either a capacitor or crystal) in combination with voltage-sensitive inputs used for frequency control and frequency range. each device has a voltage-sensitive input for frequency control; however the ls624 ls628 and ls629 devices also have one for frequency range. view all in datasheet
These voltage-controlled oscillators (VCOs) are improved versions of the original VCO family: SN54LS124, SN54LS324 thru SN54LS327, SN74LS124, and SN74LS324 thru SN74LS327. These new devices feature improved voltage-to-frequency linearity, range, and compensation. With the exception of the 'LS624 and 'LS628, all of these devices feature two independent VCOs in a single monolithic chip. The 'LS624, 'LS625, 'LS626, and 'LS628 have complementary Z outputs. The output frequency for each VCO is established by a single external component (either a capacitor or crystal) in combination with voltage-sensitive inputs used for frequency control and frequency range. Each device has a voltage-sensitive input for frequency control; however, the 'LS624, 'LS628, and 'LS629 devices also have one for frequency range. (See Figures 1 thru 6). The 'LS628 offers more precise temperature compensation than its 'LS624 counterpart. The 'LS624 features a 600 ohm internal timing resistor. The 'LS628 requires a timing resistor to be connected externally across Rext pins. Temperature compensation will be improved due to the temperature coefficient of the external resistor. Figure 3 and Figure 6 contain the necessary information to choose the proper capacitor value to obtain the desired operating frequency. A single 5-volt supply can be used: however, one set of supply voltage and ground pins (VCC and GND) is provided for the enable, synchronization-gating, and output sections, and a separate set (OSC VCC and OSC GND) is provided for the oscillator and associated frequency-control circuits so that effective isolation can be accomplished in the system. For operation of frequencies greater than 10 MHz, it is recommended that two independent supplies be used. Disabling either VCO of the 'LS625 and 'LS625 and 'LS627 can be achieved by removing the appropriate OSC VCC. An enable input is provided on the 'LS624, 'LS626, 'LS628, and 'LS629. When the enable input is low, the output is enabled: when the enable input is high, the internal oscillator is disabled, Y is high, and Z is low. Caution! Crosstalk may occur in the dual devices ('LS625, 'LS626, 'LS627 and 'LS629) when both VCOs are operated simultaneously. To minimize crosstalk, either of the following are recommended: (A) If frequencies are widely separated, use a 10-h inductor between VCC pins. (B) If frequencies are closely spaced, use two separate VCC supplies or place two series diodes between the VCC pins. The pulse-synchronization-gating section ensures that the first output pulse is neither clipped nor extended. The duty cycle of the square-wave output is fixed at approximately 50 percent. The SN54LS624 thru SN54LS629 are characterized for operation over the full military temperature range of -55C to 125C. The SN74LS624 thru SN74LS629 are characterized for operation from 0C to 70C.

Nomes alternativos do fabricante

Texas Instruments possui diversas marcas em todo o mundo que os distribuidores podem usar como nomes alternativos. Texas Instruments também pode ser conhecido(a) pelos seguintes nomes:

  • TI
  • TEXAS
  • TEXAS INST
  • TEXAS INSTR
  • TEXAS INSTRUMENT
  • TEXAS INSTRUMENTS INC
  • TEXAS INS
  • TEXAS INSTRU
  • TEXAS INSTRUMEN
  • TI/NS
  • TEX
  • Texas Instruments (TI)
  • TEXASIN
  • TEXAS INSTRUMENTS INCORPORATED
  • TEXINS
  • TEXAS INTRUMENTS
  • TEAXS
  • TEXASI
  • TI Texas Instruments
  • TEXAS INSTRUM
  • TEXAS USD
  • TEXAS INSRUMENTS
  • TEXAS INSRUMENT
  • TEXAS INSTUMENTS
  • TI-ROHS
  • Texas Instr.
  • Texas Instruments Inc.