Texas Instruments LP2987IM-5.0/NOPB

200-mA, 16-V, low-dropout voltage regulator with power good & enable 8-SOIC -40 to 125

65dB(1kHz) 120¦ÌA Fixed 200mA 1 5V 2.1V 5V 16V 350mV@ 200mA 0.014%/V SOIC-8 1.5mm

Pwr Sply Func, Voltage Regulator, LDO, SOIC-8,IS 0.1mA, VO 5V, Regline 0.007%/V

LP2987 Tube Surface Mount Over Current Over Temperature Short Circuit voltage regulator linear 350mV 1.75mm 200mA -40C~125C

Output Type:Fixed; Input Voltage Min:2.1V; Input Voltage Max:16V; No. of Outputs:1Outputs; Output Voltage Min:-; Output Voltage Max:-; Polarity:Positive Output; IC Mounting:Surface Mount; IC Case / Package:SOIC; No. of Pins:8Pins RoHS Compliant: Yes

The LP2987/8 are fixed-output 200 mA precision LDO voltage regulators with power-ON reset delay which can be implemented using a single external capacitor. The LP2988 is specifically designed for noise-critical applications. A single external capacitor connected to the Bypass pin reduces regulator output noise. Using an optimized VIP(TM) (Vertically Integrated PNP) process, these regulators deliver superior performance: Dropout Voltage: 180 mV @ 200 mA load, and 1 mV @ 1 mA load (typical). Ground Pin Current: 1 mA @ 200 mA load, and 200 uA @ 10 mA load (typical). Sleep Mode: The LP2987/8 draws less than 2 uA quiescent current when shutdown pin is held low. Error Flag/Reset: The error flag goes low when the output drops approximately 5% below nominal. This pin also provides a power-ON reset signal if a capacitor is connected to the DELAY pin. Precision Output: Standard product versions of the LP2987 and LP2988 are available with output voltages of 5.0V, 3.8V, 3.3V, 3.2V, 3.0V, or 2.8V, with guaranteed accuracy of 0.5% ("A" grade) and 1% (standard grade) at room temperature.