onsemi MM74HC373WMX

74HC373 Tape & Reel (TR) HC/UH 74HC latch circuit 7.8mA 7.8mA 280ns 801mg -40C~85C

74HC Series High Speed CMOS 3-STATE Octal D-Type Latch - SOIC-20

LATCH, D-TYPE, 8BIT, TRISTATE, WSOIC-20; Logic Family / Base Number:74HC373; Latch Type:D Type; IC Output Type:Tri State; Propagation Delay:-; Output Current:-; Logic Case Style:WSOIC; No. of Pins:20Pins; Supply Voltage

The MM74HC373 high speed octal D-type latches utilize advanced silicon-gate CMOS technology. They possess the high noise immunity and low power consumption of standard CMOS integrated circuits, as well as the ability to drive 15 LS-TTL loads. Due to the large output drive capability and the 3-STATE feature, these devices are ideally suited for interfacing with bus lines in a bus organized system. When the LATCH ENABLE input is HIGH, the Q outputs will follow the D inputs. When the LATCH ENABLE goes LOW, data at the D inputs will be retained at the outputs until LATCH ENABLE returns HIGH again. When a high logic level is applied to the OUTPUT CONTROL input, all outputs go to a high impedance state, regardless of what signals are present at the other inputs and the state of the storage elements. The 74HC logic family is speed, function, and pin-out compatible with the standard 74LS logic family. All inputs are protected from damage due to static discharge by internal diode clamps to VCC and ground.