Keyence IL-1000

LASER AMPLIFIER SENSOR 10-30V-DC

Amplifier Module

Switch Amplifier

Specifications horizontal-scroll-state#setOverflowing scroll->horizontal-scroll-state#setScrolled" data-horizontal-scroll-state-target="container" data-horizontal-scroll-state-overflowing-class="is-overflowing" data-horizontal-scroll-state-has-scrolled-class="is-hasScrolled" data-scroll-to-coord-target="container"> Model IL-1000 Type DIN-rail mount Main unit/Expansion unit Main unit Head compatibility Compatible Display Minimumdisplayable unit IL-030: 1 µm, IL-065/IL-100: 2 µm, IL-300: 10 µm, IL-600: 50 µm, IL-2000: 100 µm Display range IL-030/IL-065/IL-100: ±99.999 mm to ±99 mm (4 levels selectable), IL-300/IL-600: ±999.99 mm to ±999 mm (3 levels selectable), IL-2000: ±9999.9 mm to ±9999 mm (2 levels selectable) Display rate Approx. 10 times/sec. Analog voltage output ±5 V, 1 to 5 V, 0 to 5 V Output impedance 100 Ω*1 Analog current output 4 to 20 mA Maximum load resistance of 350 Ω*1 Control input Bank switch input Non-voltage input*2 Zero-shift input Stop emission input Timing input Reset input Control output Judgement output Open collector output (NPN, PNP changeover possible/N.O., N.C. changeover possible)*3 Alarm output Open collector output (NPN, PNP changeover possible/N.C.)*3 Current Power voltage 10 to 30 VDC ripple (P-P) 10% included, Class 2*4 Power consumption 2300 mW or less (at 30 V: 77 mA or less) Environmental resistance Pollution degree 2 Ambient temperature -10 to +50 °C 14 to 122 °F (No condensation or freezing) Relative humidity 35 to 85 % RH (No condensation) Vibration resistance 10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions Material Case / Front sheet: Polycarbonate; Key tops: Polyacetel; Cable: PVC Weight Approx. 150 g (including attachments) *1 Select and use one of ±5 V, 1 to 5 V, 0 to 5 V or 4 to 20 mA.*2 Assign an input of your choice to the 4 external input lines before using.*3 The NPN open collector rated output is: 50 mA max./ch (20 mA when adding an expansion unit) less than 30 V, residual voltage less than 1 V (less than 1.5 V when adding over 6 units including the main unit)The PNP open collector rated output is: 50 mA max./ch (20 mA/ch when adding expansion units), less than power voltage, and less than 2 V residual voltage (less than 2.5 V when adding over 6 units including the main unit)*4 If there are over 6 additional expansion units, please use a power voltage of 20 to 30 V. scroll-to-coord#run" data-x-coord="100"> series-header#doScroll"> Scroll