Infineon TLE92623BQXV33XUMA1

QFN-48-EP(7x7) Interface - Specialized ROHS

PG-VQFN-48 Interface - Specialized RoHS

Power System Basis Chip Automotive 48-Pin VQFN EP T/R

IC INTERFACE SPECIALIZED 48VQFN

Power Management Specialized - PMIC OPTIREG SYST BASIS CHIPS

CAN FD, LIN TRANSCEIVER, 1-Trnsvr, PQCC48

Sys Basis Chip, Aec-Q100, 3.3V, Vqfn-48; Product Range:-; Interface Case Style:Vqfn; No. Of Pins:48Pins; Supply Voltage Min:-; Supply Voltage Max:28V; Protocol Supported:Can, Lin; Supported Standards:Iso 11898-2, Lin2.2A/J2602, Sae Rohs Compliant: Yes |Infineon Technologies TLE92623BQXV33XUMA1

Summary of Features: Very low quiescent current consumption in Stop- and Sleep Mode; Periodic Cyclic Wake in SBC Normal- and Stop Mode; Periodic Cyclic Sense in SBC Normal-, Stop- and Sleep Mode; Low-Drop Voltage Regulator 3.3V, 250mA; Low-Drop Voltage Regulator 5V, 100mA, protected features for off-board usage; Low-Drop Voltage Regulator, driving an external PNP transistor - 3.3V in load sharing configuration or 3.3V/1.8V in stand-alone configuration, protected features for off-board usage. Current limitation by shunt resistor (up to 350mA with 470m external shunt resistor) in stand-alone configuration; High-Speed CAN Transceiver: fully compliant to HS-CAN standard ISO 11898-2:2016 fully compliant to CAN Partial Networking including CAN FD tolerant feature (acc. ISO 11898-2:2016) supporting CAN FD communication up to 5 Mbps; LIN Transceiver LIN 2.2a, J2602 with configurable TXD timeout feature and LIN Flash Mode; Fully compliant to Hardware Requirements for LIN, CAN and FlexRay Interfaces in Automotive Applications Revision 1.3, 2012-05-04; Four High-Side Outputs 7 typ.; Dedicated supply pin for High-Side Outputs; Two General Purpose High-Voltage In- and Outputs (GPIOs) configurable as add. Fail Outputs, Wake Inputs, Low-Side switches or High-Side switches; Three universal High-Voltage Wake Inputs for voltage level monitoring; Alternate High-Voltage Measurement Function, e.g. for battery voltage sensing; Configurable wake-up sources; Reset Output; Configurable timeout and window watchdog; Up to three Fail Outputs (depending on configuration); Overtemperature and short circuit protection feature; Wide supply input voltage and temperature range; Software compatible to all SBC families TLE926x and TLE927x; Green Product (RoHS compliant) & AEC Qualified; PG-VQFN-48 leadless exposed-pad popower package with Lead Tip Inspection (LTI) feature to support Automatic Optical Inspection (AOI)