Infineon TLE4913HTSA1

IC, HALL SWITCH, 5.5V, 2MA, SC59-3; MSL:MSL 3 - 168 hours; SVHC:No SVHC (19-Dec-2012)

Hall Effect Switch, Omnipolar, 20 Gauss, 10 Gauss, 3 V to 28 V, 3 Pins, SOT-23

KP200 is a PSI5 and AK-LV 29 compliant and fully mono-lithically integrated pressure sensor system for the detection of side crashes in passenger cars, PG-SC59-3, RoHS

Hall Effect Type = Omnipolar / Output Current mA = 2 / Operate Point = 3.5 mT / Release Point = 2.7 mT / Output Voltage V = 5.5 / Thermal Resistance K/W = 35 / Hysteresis = 0.8 mT / Supply Voltage Min. V = 2.4 / Supply Voltage Max. V = 5.5 / Operating Temperature Min. °C = -40 / Operating Temperature Max. °C = 85 / Package Type = SC-59 / Pins = 3 / Mounting Type = SMD / MSL = Level-1 / Packaging = Tape & Reel / Length mm = 3 / Width mm = 1.6 / Height mm = 1.1

The Infineon TLE4913 is a Hall-based sensor for use in low-power devices. e.g. as an On/Off switch in Cellular Flip-Phones, with battery operating voltages of 2.4V to 5.5V. Precise magnetic switching points and high temperature stability are achieved through the unique design of the internal circuit. An onboard clock scheme is used to reduce the average operating current of the IC. During the operate phase the IC compares the actual magnetic field detected with the internally compensated switching points. The output Q is switched at the end of each operating phase. During the Stand-by phase the output stage is latched and the current consumption of the device reduced to some µA. The IC switching behaviour is Omnipolar, i.e. it can be switched on with either the North or South pole of a magnet.