Infineon IR21094PBF

600 V half-bridge gate driver IC with shutdown and programmable deadtime, PDIP14, RoHS

Tube IR21094 Half-Bridge 1996 gate driver 150ns 50ns -40C~150C TJ 200mA 350mA 0.8V 2.9V

Driver 600V 0.35A 2-OUT High and Low Side Half Brdg Inv/Non-Inv 14-Pin PDIP Tube

150ns 2 10V 950ns 20V 800mV,2.9V Non-Inverting IGBT,MOSFET,N 50ns 200mA,350mA DIP-14 5.4mm

Half Bridge Driver, Soft Turn-On, Single Input Plus Shut-Down, All high Voltage Pins on One Side, Programmable 0.5-5us Deadtime in a 14-Lead package

MOSFET Driver IC; Device Type:Half-Bridge; Supply Voltage Min:10V; Supply Voltage Max:25V; Package/Case:14-DIP; No. of Pins:14; Operating Temperature Range:-40°C to +125°C; Delay Matching:60ns; Fall Time, tf:50ns ;RoHS Compliant: Yes

600 V Half Bridge Driver IC with typical 0.2 A source and 0.35 A sink currents in 14 Lead PDIP package for IGBTs and MOSFETs. Also available in 14 Lead SOIC, 8 Lead SOIC, and 8 Lead PDIP. | Summary of Features: Floating channel designed for bootstrap operation; Fully operational to +600 V; Tolerant to negative transient voltage; dV/dt immune; Gate drive supply range from 10 to 20 V; Undervoltage lockout for both channels; 3.3 V, 5 V, and 15 V logic input compatible; Cross-conduction prevention logic; Matched propagation delay for both channels; High side output in phase with IN input; Logic and power ground + /- 5 V offset; Internal 540ns dead-time, and programmable up to 5s with one external RDT resistor; Lower di/dt gate driver for better noise immunity; Shut down input turns off both channels

DRIVER, MOSFET, SINGLE INPUT, 21094; Device Type:MOSFET; Module Configuration:Half Bridge; Peak Output Current:350mA; Input Delay:750ns; Output Delay:200ns; Supply Voltage Range:10V to 20V; Driver Case Style:DIP; No. of Pins:14; Operating Temperature Range:-40°C to +125°C; SVHC:No SVHC (19-Dec-2011); Base Number:21094; IC Generic Number:21094; Logic Function Number:21094; No. of Outputs:2; Offset Voltage:600V; Operating Temperature Max:125°C; Operating Temperature Min:-40°C; Output Current:200mA; Output Current + Max:250mA; Output Sink Current Min:250mA; Output Source Current Min:120mA; Output Voltage:620V; Output Voltage Max:20V; Output Voltage Min:10V; Package / Case:DIP; Power Dissipation Pd:1.6W; Supply Voltage Max:20V; Supply Voltage Min:10V; Termination Type:Through Hole; Turn Off Time:200ns; Turn On Time:750ns; Voltage Vcc Max:25V; Voltage Vcc Min:10V