onsemi FXL2SD106BQX

Voltage Level 8.5ns , 1 6 1.1V 3.6V 100Mbps 1.1V~3.6V 1.1V~3.6V QFN , 3.5mm*2.5mm*750¦Ìm

1.1V~3.6V 1 6 1.1V~3.6V 100Mbps DQFN-16(2.5x3.5) Translators / Level Shifters ROHS

Low-Voltage Dual-Supply 6-Bit Voltage Translator with Auto-Direction Sensing

e4 ACTIVE (Last Updated: 5days ago) FXL2SD106 Nickel/Palladium/Gold (Ni/Pd/Au) level shifter translator 8.5ns 3.6V 123mg -50mA

LOW VOLT LVL TRANSLATOR, -40 TO 85DEG C; No. of Inputs: 6; Output Current: -; Propagation Delay: 22ns; No. of Pins: 16Pins; Logic Case Style: DQFN; Supply Voltage Min: 1.1V; Supply Voltage Max: 3.6V; Operating Temperature Min: -40°C; Operating Temperature Max: 85°C; Logic Type: Low-Voltage Level Translator; Product Range: -; Automotive Qualification Standard: -; MSL: MSL 1 - Unlimited; SVHC: No SVHC (15-Jan-2019)

The FXL2SD106 is a configurable dual-voltage-supply translator designed for both uni-directional and bidirectional voltage translation between two logic levels. The device allows translation between voltages as high as 3.6V to as low as 1.1V. The A port tracks the VCCA level and the B port tracks the VCCB level. This allows for bi-directional voltage translation over a variety of voltage levels: 1.2V, 1.5V, 1.8V, 2.5V, and 3.3V.The device remains in 3-state until both VCC reach active levels, allowing either VCC to be powered-up first. Internal power-down control circuits place the device in 3-state if either VCC is removed. The OE input, when low, disables both A and B ports by placing them in a 3-state condition. The FXL2SD106 is designed so that OE and CLK IN are supplied by VCCA. The device senses an input signal on A or B port automatically. The input signal is transferred to the other port. The FXL2SD106 is not designed for SD card applications. The internal bus hold circuitry conflicts with pull-up resistors. SD cards have internal pull-up resistors on the CD/DAT3 pins.