STMicroelectronics LD1086D2T15R

Fixed Positive LDO Regulator, 1.5V, 1.5V Dropout, BIPolar, PSSO2

1.5A Low drop positive voltage regulator adjustable and fixed

LD1086 Cut Tape (CT) Surface Mount Over Current Over Temperature voltage regulator linear 1.3V 2.54mm 1.5A -40C~125C

The LD1086 is a LOW DROP Voltage Regulator able to provide up to 1.5A of output current. Dropout is guaranteed at a maximum of 1.2V at the maximum output current, decreasing at lower loads. The LD1086 is pin to pin compatible with the older 3-terminal adjustable regulators, but has better performances in term of drop and output tolerance. A 2.85V output version is suitable for SCSI-2 active termination. Unlike PNP regulators, where a part of the output current is wasted as quiescent current, the LD1086 quiescent current flows into the load, so increase efficiency. Only a 10uF minimum capacitor is need for stability. The device is supplied in TO-220, D2PAK, D 2PAK/A and DPAK. On chip trimming allows the regulator to reach a very tight output voltage tolerance, within +-1% at 25oC.