onsemi MM74HC175MTC

Flip Flop D-Type Bus Interface Pos-Edge 1-Element 16-Pin TSSOP Rail

Lead Free Master Reset D-Type Positive Edge Flip Flop -40C~85C TA 8muA 5pF 2V~6V

Positive edge 8μA 26ns@ 6V,50pF Antiphase，Non-inverting complementary 1 2V 6V 5.2mA Master Reset HC Single ended 5pF 5.2mA 70MHz TSSOP-16 SMD mount 5mm*4.4mm*900μm

The MM74HC175 high speed D-type flip-flop with complementary outputs utilizes advanced silicon-gate CMOS technology to achieve the high noise immunity and low power consumption of standard CMOS integrated circuits, along with the ability to drive 10 LS-TTL loads. Information at the D inputs of the MM74HC175 is transferred to the Q and Q# outputs on the positive going edge of the clock pulse. Both true and complement outputs from each flip flop are externally available. All four flip-flops are controlled by a common clock and a common CLEAR. Clearing is accomplished by a negative pulse at the CLEAR input. All four Q outputs are cleared to a logical "0" and all four Q# outputs to a logical "1." The 74HC logic family is functionally as well as pin-out compatible with the standard 74LS logic family. All inputs are protected from damage due to static discharge by internal diode clamps to VCC and ground.