onsemi FT3001UMX

ROHS3Compliant Cut Tape (CT) FT3001 Reset Timer supervisor 3V 1.4mm 400ms Typical 5mW

Timers & Support Products HIGHLY INTEGRATED GRN MODE PWM CNTRL

Timer IC, Reset, 1, 1.8 V to 5 V, 10 Pins, Ultra Thin MLP

Reset Timer with Configurable Delay

IC SUPERVISOR RESET TIMER 10UMLP

Real Time Clock, 0 Timer(s), CMOS, QCC

Standard Timer Single 10-Pin UMLP T/R

RESET TIMER, -40 TO 85DEG C, MLP-10;

Reset Timer, -40 To 85Deg C, Mlp-10; Frequency:-; Supply Voltage Min:1.8V; Supply Voltage Max:5V; Digital Ic Case:Mlp; No. Of Pins:10Pins; Operating Temperature Min:-40°C; Operating Temperature Max:85°C; Product Range:- Rohs Compliant: Yes |Onsemi FT3001UMX

The FT3001 is a timer for resetting a mobile device where long reset times are needed. The long delay helps avoid unintended resets caused by accidental key presses. Four timer values can be selected by configuring the DSR0 and DSR1 pins. The FT3001 has two inputs for single- or dual-button resetting capability. The device has two outputs: a push-pull output with 0.5mA drive and an open-drain output with 0.5mA pull-down drive. The FT3001 draws minimal supply current when inactive and functions over a power supply range of 1.65V to 5.0V.