onsemi FSUSB30BQX

DPDT(DPDT) 1 720MHz USB DQFN-14(3x2.5) Analog Switches - Special Purpose ROHS

Surface Mount Lead Free RoHS Compliant Single USB Switch IC 480Mbps 120mg 720MHz 6.5Ohm

Low-Power 2-Port High-Speed USB 2.0 (480 Mbps) Switch

Analog Switch Single DPDT 14-Pin DQFN EP T/R

MOSFETs Low Pwr 2-Port Hi-Spd USB 2.0

The FSUSB30 is a low-power, two-port, high-speed USB 2.0 switch. Configured as a double-pole double-throw (DPDT) switch, it is optimized for switching between two high-speed (480Mbps) sources or a Hi-Speed and Full-Speed (12Mbps) source. The FSUSB30 is compatible with the requirements of USB2.0 and features an extremely low on capacitance (CON) of 3.7pF. The wide bandwidth of this device (720MHz), exceeds the bandwidth needed to pass the third harmonic, resulting in signals with minimum edge and phase distortion. Superior channel-to-channel crosstalk minimizes interference.The FSUSB30 contains special circuitry on the D+/D- pins which allows the device to withstand an overvoltage condition when powered off. This device is also designed to minimize current consumption even when the control voltage applied to the S pin, is lower than the supply voltage (VCC). This feature is especially valuable to ultra-portable applications such as cell phones, allowing for direct interface with the general purpose I/Os of the baseband processor. Other applications include switching and connector sharing in portable cell phones, PDAs, digital cameras, printers, and notebook computers.