onsemi FPF1038UCX

FPF1038 Series 1 Channel 5.5 V 100 mOhm SMT High Side Load Switch - WLCSP-6

Tape & Reel (TR) FPF1038 e1 On/Off power distribution switch 1.5mm 5.5V 4.4ms 3.5A

High End BGA, SMD, Adhesive Mount, 1.5mm × 1mm × 630μm

Low On-Resistance, Slew-Rate-Controlled Load Switch

Power Switch 1-OUT 2A 0.075Ohm 6-Pin WLCSP T/R

TAPE REEL/Advanced Load management Switch

Professional Power Management (PMIC)

IC LOAD MGMT SWITCH ADV 6-WLCSP

IC PWR SWITCH P-CHAN 1:1 6WLCSP

POWER LOAD SW, HIGH SIDE, -40 TO 85DEG C; Power Load Switch Type: High Side; Input Voltage: 5.5V; Current Limit: 3.5A; On State Resistance: 0.021ohm; Distribution Switch Case Style: WLCSP; No. of Pins: 6Pins; Thermal Protectio

The FPF1038 advanced load management switch targets applications requiring a highly integrated solution for disconnecting loads powered from DC Power Rail (<6V) with stringent shutdown current targets and high load capacitances (up to 200 µF). The FPF1038 consists of slew-rate controlled low-impedance MOSFET switch (21 mΩ typical) and other integrated analog features. The slew-rate controlled turn-on characteristic prevents inrush-current and the resulting excessive voltage droop on power rails. This device has exceptionally low shutdown current drain (<1 µA maximum) that facilitate compliance in very low standby power applications. The input voltage range operates from 1.2 V to 5.5 V DC to fulfill a wide range of applications in consumer, optical, medical, storage, portable, and industrial device power management. Switch control is managed by a logic input (active HIGH) capable of interfacing directly with low-voltage control signal/GPIO with no external pull-up required. The device is packaged in advanced fully "green" 1 mm x 1.5 mm Wafer-Level Chip-Scale Packaging (WLCSP); providing excellent thermal conductivity, small footprint, and low electrical resistance for wider application usage.