onsemi FAN3227CMX

CMOS input, dual non-inverting output, peak 3A sink, 3A source current Low-Side Gate Driver

Tape & Reel (TR) FAN3227 Low-Side 2014 gate driver 22ns -40C~125C TJ 3A 3A 460mW

FAN3227 Series 18 V 2 A Surface Mount Dual High Speed Low Side Driver-SOIC-8

FAIRCHILD SEMICONDUCTOR FAN3227CMX DRIVER, MOSFET, DUAL, 2A, CMOS, 8SOIC

Driver 3A 2-OUT Low Side Full Brdg Non-Inv 8-Pin SOIC T/R

DRIVER, MOSFET, DUAL, 2A, CMOS, 8SOIC; Device Type:MOSFET; Module Configuration:Low Side; Peak Output Current:3A; Supply Voltage Range:4.5V to 18V; Driver Case Style:SOIC; No. of Pins:8; Output Delay:15ns; Operating Temperature Range:-40°C to +125°C; MSL:MSL 1 - Unlimited

The FAN3226-29 family of dual 2A gate drivers is designed to drive N-channel enhancement-mode MOSFETs in low-side switching applications by providing high peak current pulses during the short switching intervals. The driver is available with either TTL or CMOS input thresholds. Internal circuitry provides an under-voltage lockout function by holding the output low until the supply voltage is within the operating range. In addition, the drivers feature matched internal propagation delays between A and B channels for applications requiring dual gate drives with critical timing, such as synchronous rectifiers. This enables connecting two drivers in parallel to effectively double the current capability driving a single MOSFET. The FAN322X drivers incorporate MillerDrive™ architecture for the final output stage. This bipolar-MOSFET combination provides high current during the Miller plateau stage of the MOSFET turn-on / turn-off process to minimize switching loss, while providing rail-to-rail voltage swing and reverse current capability. The FAN3226 offers two inverting drivers and the FAN3227 offers two non-inverting drivers. Each device has dual independent enable pins that default to ON if not connected. In the FAN3228 and FAN3229, each channel has dual inputs of opposite polarity, which allows configuration as non-inverting or inverting with an optional enable function using the second input. If one or both inputs are left unconnected, internal resistors bias the inputs such that the output is pulled low to hold the power MOSFET off.