Charge Pump Dc/Dc Converter Tsot23-6; Tensión De Entrada Mín.:2.7V; Tensión De Entrada Máx.:4.5V; Núm. De Salidas:1; Tipo De Conversor Ci Dc/Dc:Sot-23; Núm. De Contactos:6; Corriente De Salida:100Ma; Tensión De Salida Mín.:2.7V |Onsemi CAT3200TDI-GT3
CHARGE PUMP DC/DC CONVERTER TSOT23-6; To; CHARGE PUMP DC/DC CONVERTER TSOT23-6; Topology:Boost (Step Up); Input Voltage Min:2.7V; Input Voltage Max:4.5V; No. of Outputs:1Outputs; DC / DC Converter IC Case:SOT-23; No. of Pins:6Pins; Output Current:100mA; Output Voltage Max:6V
The CAT3200 and CAT3200-5 are switched capacitor boost converters that deliver a low noise regulated output voltage. The CAT3200-5 gives a fixed regulated 5.0 V output. The CAT3200 has an adjustable output using external resistors. The constant frequency 2.0 MHz charge pump allows small 1.0 F ceramic capacitors to be used. Maximum output loads of up to 100 mA can be supported over a wide range of input supply voltages (2.7 V to 4.5 V) making the device ideal for battery-powered applications. A shutdown control input allows the device to be placed in power-down mode reducing the supply current to less than 1.0 A. In the event of short circuit or overload conditions the device is fully protected by both foldback current limiting and thermal overload detection. In addition a soft start slew rate control circuit limits inrush current during power up. The CAT3200-5 is available in a 6-lead 1 mm max thin SOT23 package. The CAT3200 is available in an 8-lead MSOP package.