onsemi 74VHC123ASJX

ACTIVE (Last Updated: 4days ago) e3 74VHC123 2007 multivibrator 2V~5.5V 242mg 8mA 8mA 8.1ns

Ic, monostable Multivibrator, hc-Cmos, sop,16Pin, plastic Rohs Compliant: Yes |Onsemi 74VHC123ASJX

10.2ns Schmitt Trigger 2V~5.5V SO-16P Monostable Multivibrators ROHS

Monostable Multivibrator, AHC/VHC Series, 2-Func, CMOS, PDSO16

Monostable Multivibrator Dual-Element -40C 85C 16-Pin SOP T/R

Dual Retriggerable Monastable Multivibrator

50pF SOIC-16 10.2mm*5.3mm*1.8mm

MONOSTABLE MULTIVIBRATOR, AHC/VH

The VHC123A is an advanced high speed CMOS Monostable Multivibrator fabricated with silicon gate CMOS technology. It achieves the high speed operation similar to equivalent Bipolar Schottky TTL while maintaining the CMOS low power dissipation. Each multivibrator features both a negative, A, and a positive, B, transition triggered input, either of which can be used as an inhibit input. Also included is a clear input that when taken low resets the one-shot. The VHC123A can be triggered on the positive transition of the clear while A is held low and B is held high. The output pulse width is determined by the equation: PW = (Rx)(Cx); where PW is in seconds, R is in ohms, and C is in farads. Limits for Rx and Cx are: External capacitor, CxNo limit External resistors, Rx VCC = 2.0V, 5 kohm min VCC > 3.0V, 1 kohm min An input protection circuit ensures that 0 to 7V can be applied to the input pins without regard to the supply voltage. This device can be used to interface 5V to 3V systems and two supply systems such as battery back up. This circuit prevents device destruction due to mismatched supply and input voltages.