Texas Instruments DS481TM

Low Power RS-485/RS-422 Multipoint Transceiver with Sleep Mode 8-SOIC -40 to 85

Single Transmitter/Receiver RS-422/RS-485 8-Pin SOIC N Rail

IC, TXRX, RS485/422, W/SLEEP, 8SOIC; Device Type:Line Driver / Receiver; IC Inte

EAR99 DS481 Tube RS422RS485 interface receiver 5V 0.000002A 4.9mm 400ns

IC, TXRX, RS485/422, W/SLEEP, 8SOIC; Device Type:Line Driver / Receiver; IC Interface Type:RS422, RS485; No. of Drivers:1; Supply Voltage Min:4.75V; Supply Voltage Max:5.25V; Driver Case Style:SOIC; No. of Pins:8; Operating Temperature Min:-40°C; Operating Temperature Max:85°C; SVHC:No SVHC (20-Jun-2013); Base Number:481; Operating Temperature Range:-40°C to +85°C; Package / Case:SOIC; Supply Voltage Range:4.75V to 5.25V

The DS481 is a low-power transceiver for RS-485 and RS422 communication. The device contains one driver and one receiver. The drivers slew rate allows for operation up to 2.0 Mbps (see Applications Information section). The transceiver draws 200 uA of supply current when unloaded or 0.2 uA when in the automatic sleep mode. Sleep mode is activated by inactivity on the enables (DE and RE (Note 1)). Holding DE =L and RE (Note 1)=H for greater than 600 ns will enable the sleep mode. The DS481 operates from a single +5V supply. The driver is short-circuit current limited and is protected against excessive power dissipation by thermal shutdown circuitry that places the driver outputs into TR I-STATE(R) (High Impedance state) under fault conditions. The driver guarantees a minimum of 1.5V differential output voltage with maximum loading across the common mode range (VOD3). The receiver has a failsafe feature that guarantees a logic high output if the input is open circuit. The DS481 is available in a surface mount package and is characterized for Industrial temperature range operation.