Microchip MCP120-485HI/TO

Processor Supervisor 4.725V 3V/3.3V/5V 3-Pin TO-92 Bag

Voltage Detector, 1V to 5.5V, TO-92-3, RoHS

System Supervisors - Power Supply Monitors with Reset Generators Open Drain Low

Supervisor Open Drain Active Low

IC SUPERVISOR 1 CHANNEL TO92-3

ROHS3Compliant Bulk MCP120 Simple Reset/Power-On Reset supervisor 5V 150ms Minimum 60muA -40C~85C TA

IC SUPERVISOR ACTIVE LOW TO-92

60¦ÌA 1V 5.5V TO-92-3 4.71mm*3.62mm*4.62mm

Ic, volt Detector, fixed,+4.73V, cmos, sip,3Pin, plastic Rohs Compliant: Yes |Microchip Technology MCP120-485HI/TO

The Microchip Technology Inc. MCP120/130 is a volt-age supervisory device designed to keep a micro controller in reset until the system voltage has reached the proper level and stabilized. It also operates as protection from brown-out conditions when the supply voltage drops below a safe operating level. Both devices are available with a choice of seven different trip voltage sand both have open drain outputs. The MCP130 has an internal 5 k\Omega pull up resistor. Both devices have active low RESET pins. The MCP120/130 will assert the RESET signal whenever the voltage on the VDD pin is below the trip-point voltage.