Contact Configuration = 1NO / Termination Type = Pins / Mounting Type = Through Hole / Width mm = 6.5 / Length mm = 8.6 / Load Voltage Max. V = 400 / Load Current Max. mA = 200 / Load Voltage Min. V = 0 / Load Current Min. mA = 120 / Height mm = 3.4 / Package Type = DIP-6
400 V, 120 mA AC/200 mA DC single-pole Photovoltaic Relay in a 6-pin DIP Package. This normally open solid-state relay can replace electromechanical relays in many applications. This SSR is specifically designed for telecom applications but can also be used in other applications. PVT412L employs an active current-limiting circuitry enabling it to pass FCC Part 68 and other regulatory agency current surge requirements when overvoltage protection is provided.
RELAY, PHOTOVOLTAIC; Load Voltage Max:400V; Load Current:120mA; On State Resistance Max:35ohm; Contact Configuration:SPST-NO; Isolation Voltage:4kV; Forward Current If:25mA; Relay Terminals:Through Hole; SVHC:No SVHC (18-Jun-2012); Base Number:412; Contact Configuration:SPST-NO; Control Current Max:25mA; Control Current Typ:0.4mA; Control Voltage Type:DC; Current Load AC Max:120mA; Current Temperature:40°C; Dielectric Strength Voltage Vrms:4000V; Insulation Resistance:10Gohm; Load Current DC Max:200mA; Load Current Max:120mA; Load Current RMS Max:120mA; Load Voltage DC Max:400V; Load Voltage DC Min:0VDC; Load Voltage Range:0V to 400V; Logic Function Number:412; No. of Pins:6; No. of Poles:1; Nominal Control Current DC:3mA; Off State Resistance Min:0.4Gohm; On State AC Resistance @ temp:35ohm; On State Resistance DC @ temp:9ohm; On State Resistance Max:35ohm; Operating Temperature Max:85°C; Operating Temperature Min:-40°C; Operating Voltage V(pk) Max:400V; Output Type:MOSFET