Honeywell LSXV3K

Switch Limit N.O./N.C. SPDT Adjustable Top Plunger Screw Mount 10A 24VDC 17.8N Linear Conduit

LIMIT SWITCH, EXPLOSION PROOF, NON PLUG-IN, TOP PLUNGER, ADJ, 1NC/1NO, SNAP ACT

Snap Acting/Limit Switch, SPDT, Momentary, 10A, 240VDC, 6.61mm, Screw Terminal, Adjustable Top Pin Plunger Actuator, Panel Mount

SWITCH SNAP ACTION SPDT 10A 120V

Limit Switch, Spdt, Plunger, 10A, 600Vac; Limit Switch Actuator:Top Plunger; Contact Configuration:Spdt; Contact Current Ac Max:10A; Contact Voltage Ac Max:600V; Operating Force Max:17.8N; Product Range:Lsx Series Rohs Compliant: Yes |Honeywell LSXV3K

HONEYWELL MICRO SWITCH LSXV3K Explosion Proof Limit Switch. More details: Explosion Proof Limit Switch, Plunger, Top, 10 Amps, Contact Form 1NC/1NO SPDT Snap Action, Double Break, Voltage Rating 600VAC/250VDC, NEMA Rating 1, 3, 4, 6, 7, 13, 1/2 In.-14 NPT Wiring Entry, Electrical Connection Screw Terminals, IP Rating No IP Rating, Movement Linear, Adjustable, Travel Maximum Pretravel 0.07 In., Minimum Over Travel 0.19 In., Differential Travel 0.015 In., Series LSX, Operating Temp. Range 10 Degrees to 250 Degrees F, Actuator Length 2.84 In., Roller Width 0.19 In.

MICRO SWITCH LSX Series Explosion-Proof Limit Switches (Non Plug-in), Top Plunger - Adjustable , 1NC 1NO SPDT Snap Action, 0.5 in - 14NPT conduit MICRO SWITCH LSX switches are for use either indoors or outdoors in hazardous atmospheres as they are a completely sealed, explosion-proof device. Mounting hole location and tracking is the same as the long established MICRO SWITCH ™ ML-E1 explosion-proof switch. An optional mounting plate provides the same tracking and mounting as the standard HDLS. The majority of HDLS operating heads and circuitry options are available on the LSX. Standard HDLS levers are used, but because of explosion-proof requirements, only nylon rollers or other non-sparking material can be selected. Plunger and cat whisker types listed in the LSX order guide are non-sparking materials. The MICRO SWITCH LSX withstands pressure of an internal explosion and cools the exploding gases below the kindling temperature of the explosive atmosphere. Flame paths are provided by the cover-housing threads and an extended plunger between the switch cavity and head.