Honeywell CSNF161

Sensor, Closed Loop Current, Measures AC, DC or Impulse Current

Board Mount Current Sensors Current Sensors/ CURR SENSOR

500ns -12V 10mA ¡À15V Bidirectional 150A ¡À0.5% Through hole mounting 36.5mm*14.5mm*29.8mm

CURRENT TRANSDUCER; Supply Voltage Range DC:12V to 15V; Sensor Output:Closed Loop; Accuracy:0.5%; Response Time:500µs; SVHC:No SVHC (20-Jun-2011); Accuracy %:0.5%; Current Consumption:14mA; Current Range AC:0 to 150A; Current Range DC:0 to 150A; Current Rating:100A; External Depth:14.5mm; External Length / Height:29.8mm; External Width:36.5mm; Fixing Centres:25mm; Frequency Max:150kHz; Frequency Min:0Hz; Linearity:± 0.1%; Operating Temperature Max:85°C; Operating Temperature Min:-40°C; Output Current:100mA; Output Type:Current; Percentage Accuracy +:0.5%; Percentage Accuracy -:0.5%; Series:CSN; Supply Voltage DC Max:15V; Supply Voltage DC Min:12V; Total Current Rating:150A; Transducer Function:Closed Loop Current; Turns Ratio:1000

CSN Series closed loop linear current sensor, measures ac, dc or impulse current, 100 A nominal, ±150 A range, center pin, 1000 turns CSN Series closed loop linear current sensors are based on magnetoresistive or Hall-effect technology and the null balance or zero magnetic flux method (feedback system). The magnetic flux in the sensor core is constantly controlled at zero. The amount of current required to balance zero flux is the measure of the primary current flowing through the conductor, multiplied by the ratio of the primary to secondary windings. This closed loop current is the output from the device and presents an image of the primary current reduced by the number of secondary turns at any time. This current can be expressed as a voltage by passing it through a resistor.