Analog Devices ADL5367-EVALZ

Evaluation Board For 500 MHz To 1700 MHz Balanced Mixer, Low Buffer And RF Balun
Obsolete

데이터시트 및 문서

Analog Devices ADL5367-EVALZ에 대한 데이터시트 및 제조업체 설명서를 다운로드하세요.

Analog Devices

Datasheet24 페이지11년 전
Datasheet24 페이지16년 전

공급망

Lifecycle StatusObsolete (Last Updated: 4 years ago)
Manufacturer Lifecycle StatusOBSOLETE (Last Updated: 4 years ago)

관련 부품

Analog DevicesADL5534-EVALZ
ADL5534 RF Amplifier Evaluation Board
Analog DevicesADL5353-EVALZ
2200 MHz To 2700 MHz Balanced Mixer, LO Buffer, IF Amplifier, and RF Balun
Analog DevicesADL5365-EVALZ
Evaluation Board For 1200 MHz To 2500 MHz Balanced Mixer, LO Buffer And RF Balun

설명

유통업체에서 제공한 Analog Devices ADL5367-EVALZ에 대한 설명입니다.

Evaluation Board For 500 MHz To 1700 MHz Balanced Mixer,Low Buffer And RF Balun
Double Balanced Mixer, 500MHz Min, 1700MHz Max, 8.5dB Conversion Loss-Max, BICMOS
ADL5367 Up-Down Converter and Mixer Evaluation Board
The ADL5367 uses a highly linear, doubly balanced passive mixer core along with integrated RF and LO balancing circuitry to allow for single-ended operation. The ADL5367 incorporates an RF balun, allowing optimal performance over a 500 MHz to 1700 MHz RF input frequency range. Performance is optimized for RF frequencies from 500 MHz to 1200 MHz using a high-side LO and for RF frequencies from 900 MHz to 1700 MHz using a low-side LO. The balanced passive mixer arrangement provides good LO to RF leakage, typically better than −35 dBm, and excellent intermodulation performance. The balanced mixer core also provides extremely high input linearity, allowing the device to be used in demanding cellular applications where inband blocking signals may otherwise result in the degradation of dynamic performance. A high linearity IF buffer amplifier follows the passive mixer core to yield a typical power conversion loss of 7.7 dB and can be used with a wide range of output impedances. The ADL5367 provides two switched LO paths that can be used in TDD applications where it is desirable to rapidly switch between two local oscillators. LO current can be externally set using a resistor to minimize dc current commensurate with the desired level of performance. For low voltage applications, the ADL5367 is capable of operation at voltages down to 3.3 V with substantially reduced current. Under low voltage operation, an additional logic pin is provided to power down (<200 µA) the circuit when desired. The ADL5367 is fabricated using a BiCMOS high performance IC process. The device is available in a 5 mm × 5 mm, 20-lead LFCSP and operates over a −40°C to +85°C temperature range. An evaluation board is also available. Applications Cellular base station receivers Transmit observation receivers Radio link downconverters

제조업체 별칭

Analog Devices에는 유통업체가 대체하여 사용할 수 있는 전 세계 여러 브랜드가 있습니다. Analog Devices는 다음 이름으로도 알려져 있습니다:

  • Analog Devices Inc
  • ANALOG
  • ADI
  • ANALOG DEVICE
  • ANALOG DEV
  • AD
  • ANA
  • PMI
  • Analog Devices Inc/Maxim Integrated
  • ADV
  • ADA
  • ANALOG DEVIC
  • PMI/AD
  • ANALOG DEVI
  • AD/PMI
  • STOCK
  • Analog Devices / Linear Technology
  • ANALOG INTERGRATIONS CORP
  • AD - Analog Devices
  • PRECISION MONOLITIC INC
  • ADI (Analog Devices Inc)
  • ANADEV
  • Analog Devices / Hittite
  • ANALOG DEVICES (ADI)
  • ANLOGDEVIC
  • Analog Devices Inc.
  • Maxim Analog Devices
  • Analog Devices / Maxim Integrated

부품 번호 별칭

이 부품은 다음과 같은 대체 부품 번호로 알려져 있을 수 있습니다.

  • ADL5367EVALZ