Texas Instruments UC3834N

IC LNR REG CTRLR 1OUT 16DIP Linear Regulator Controller IC Positive Fixed and Negative Fixed 1 Output 16-PDIP

Controllers - Low Dropout (LDO) High Efficiency Linear Regulator

LDO Regulator Pos 1.5V-2V 16-Pin PDIP Tube

High Efficiency Linear egulator 16-PDIP 0 to 70

ROHS3Compliant THROUGH-HOLE Contains Lead Positive Fixed and Negative Fixed Linear Regulator Controller IC 5V 4.57mm 0C~70C 350mA

100dB 5.5mA positive electrode Fixed 350mA 1.47V 5V 1.5V，-2V 35V 500mV@ 5A 15mV 15mV PDIP-16 Fixed mounting，Through hole mounting 19.3mm*6.35mm*4.57mm

IC, LINEAR VOLTAGE REGULATOR 1.5V 16-DIP; IC, LINEAR VOLTAGE REGULATOR 1.5V 16-DIP; Primary Input Voltage:15V; Output Voltage Fixed:1.5V; No. of Outputs:1; No. of Pins:16; Output Current:200mA; Operating Temperature Range:0°C to +70°C; Leaded Process Compatible:Yes

The UC1834 family of integrated circuits is optimized for the design of low input-output differential linear regulators. A high gain amplifier and 200mA sink or source drive outputs facilitate high output current designs which use an external pass device. With both positive and negative precision references, either polarity of regulator can be implemented. A current sense am-plifier with a low, adjustable, threshold can be used to sense and limit currents in either the positive or negative supply lines. In addition, this series of parts has a fault monitoring circuit which senses both under and over-voltage fault conditions. After a user defined delay for transient rejection, this circuitry provides a fault alert output for either fault condition. In the over-voltage case, a 100mA crowbar output is activated. An over-voltage latch will maintain the crowbar output and can be used to shutdown the driver outputs. System control to the device can be ac com-modated at a single input which will act as both a supply reset and remote shutdown terminal. These die are protected against excessive power dissi-pation by an internal thermal shutdown function.