STMicroelectronics LD1086V18

1.5 A adjustable and fixed low drop positive voltage regulator

LD1086V18, LDO VOLTAGE REGULATOR, 1.5A, 1.8 V +/-1%, 3-PIN TO-220

LDO Regulator Pos 1.8V 1.5A 3-Pin(3+Tab) TO-220AB Tube

Fixed Positive LDO Regulator, 1.8V, 1.5V Dropout, BIPolar, SFM3

STMICROELECTRONICS LD1086V18Fixed LDO Voltage Regulator, 4.8V to 30V, 1.3V Dropout, 1.8Vout, 1.5Aout, TO-220-3

LD1086 Tube Through Hole Over Current Over Temperature voltage regulator linear 1.3V 9.15mm 1.5A -40C~125C

IC REG LINEAR 1.8V 1.5A TO220AB

V REG LDO 1.5A +1.8V, 1086, TO2203; Voltage Regulator Type:Fixed; Voltage, Input Max:30V; Voltage, Output Max:1.8V; Output Current Max:1.5A; Voltage, Dropout:1.3V; Percentage Accuracy:1%; Outputs, No. of:1; Voltage, Supply Min:4.9V; ;RoHS Compliant: Yes

The LD1086 is a LOW DROP Voltage Regulator able to provide up to 1.5A of output current. Dropout is guaranteed at a maximum of 1.2V at the maximum output current, decreasing at lower loads. The LD1086 is pin to pin compatible with the older 3-terminal adjustable regulators, but has better performances in term of drop and output tolerance. A 2.85V output version is suitable for SCSI-2 active termination. Unlike PNP regulators, where a part of the output current is wasted as quiescent current, the LD1086 quiescent current flows into the load, so increase efficiency. Only a 10uF minimum capacitor is need for stability. The device is supplied in TO-220, D2PAK, D 2PAK/A and DPAK. On chip trimming allows the regulator to reach a very tight output voltage tolerance, within +-1% at 25oC.