onsemi FT8010MPX

ROHS3Compliant Tape & Reel (TR) FT8010 Reset Timer supervisor 5V 2mm Adjustable/Selectable 5mW

Voltage Supervisor/Reset IC, Fixed, 1 Channel

Reset Timer with Configurable Delay

LOGIC IC - 8LD, MLP, DUAL, JEDEC MO-229, 2.0 X 2.0MM

Timer IC, Reset, 2, 1.8 V to 5 V, 8 Pins, MLP

IC RESET TIMER CONFIG DELAY 8MLP

IC STANDARD TIMER SINGLE 8-PIN MLP EP SMD

IC SMART RESET TDFN - 8-LEAD, 2 X 2 MM

1.8V 5V MLP-8 , 2mm*2mm*800¦Ìm

RESET TIMER, -40 TO 85DEG C, MLP-8;

POWER SUPPLY MANAGEMENT CIRCUIT,

The FT8010 is a timer for resetting a mobile device where long reset times are needed. The long time delay helps avoid unintended resets caused by accidental key presses. Two delays can be selected by hard-wiring the DSR pin: 7.5 20% seconds or 11.25 20% seconds.The FT8010 has two identical inputs for single or dual switch resetting capability. The device has two outputs: a push-pull output with 0.5mA drive and an open-drain output with 0.5mA pull-down drive.The FT8010 draws minimal ICC current when inactive and functions over a wide power supply range of 2.0V to 5.0V.