onsemi FR015L3EZ

Low-Side Reverse Bias and Reverse Polarity Protector 10uA 0.7V to 1.3V 6-Pin WDFN T/R

ESD Suppressors / TVS Diodes LS Revrse Bias/Rvrse Polarity Protector

VDFN-6(2x2) ESD and Surge Protection (TVS/ESD) ROHS

Low Side Reverse Bias/Reverse Polarity Protector - 6LD,MLP,DUAL,JEDEC MO-229, 2MM SQUARE (FUSED PIN 5 TO DAP)

Transient Suppression Diode (TVS)

MLP-6 ESD Protection Devices ROHS

ESD PROTECTION DEVICE, 1.3V, WDFN-6;

LOW SIDE REV BIAS POLAR PROTECT

TVS DEVICE MIXED 15V 6MICROFET

Reverse bias is an increasingly common fault event that may be generated by user error, improperly installed batteries, automotive environments, erroneous connections to third-party chargers, negative “hot plug” transients, inductive transients, and readily available negatively biased rouge USB chargers.Fairchild circuit protection is proud to offer a new type of reverse bias protection devices. The FR devices are low resistance, series switches that, in the event of a reverse bias condition, shut off power and block the negative voltage to help protect downstream circuits.The FR devices are optimized for the application to offer best in class reverse bias protection and voltage capabilities while minimizing size, series voltage drop, and normal operating power consumption.In the event of a reverse bias application, FR015L3EZ devices effectively provide a full voltage block and can easily protect -0.3V rated silicon.From a power perspective, in normal bias, a 15mΩ FR device in a 0.1A application will generate only 1.5mV of voltage drop or 0.15mW of power loss. In reverse bias, FR devices dissipate less then 10μW in a 3V reverse bias event. This type of performance is not possible with a diode solution.Benefits extend beyond the device. Due to low power dissipation, not only is the device small, but heat sinking requirements and cost can be minimized as well.